Home
Download PDF
Order CD-ROM
Order in Print
Home
>
Cold Research and Engineering Laboratory Reports
>
> SR99_11
INTRODUCTION - SR99_110007
Objectives - SR99_110008
Figure 1. Fabrication of test specimens.
Figure 2. Typical installation and adhesion test setup.
Figure 3. Relationship between minimum void size, peel strength, and internal void temperature
Results and discussion - SR99_110012
TENSILE STRENGTH AND ELONGATION
Table 2. Comparison of adhesion values.
Figure 6. Tension test setup.
New puncture test apparatus
Figure 7. Commercially available instrument used as the basis for the proposed apparatus.
Figure 9. Schematic of the puncture failure detection system.
Figure 10. Puncture test results during the determination of the tip angle.
Figure 12. Puncture test results for second test set.
WATER VAPOR PERMEANCE
Procedures
Figure 16. Sample ready for water vapor permeance testing.
Test chamber and controls
Table 6. Modified cup method.
CONCLUSIONS - SR99_110026
RECOMMENDATIONS - SR99_110027
LITERATURE CITED - SR99_110028
APPENDIX A: MANUFACTURER'S DATA FROM PRODUCT BROCHURES FOR REFERENCE PURPOSES
APPENDIX A: MANUFACTURER'S DATA FROM PRODUCT BROCHURES FOR REFERENCE PURPOSES - CONTINUED
APPENDIX B: ADHESION TEST DATA
Supplier Mortar Slab #1
Supplier Mortar Slab #2
Supplier Mortar Slab #3
CRREL Mortar Slab #1 - SR99_110035
CRREL Mortar Slab #2 - SR99_110036
CRREL Mortar Slab #3 - SR99_110037
CRREL Mortar Slab #1 - SR99_110038
CRREL Mortar Slab #2 - SR99_110039
CRREL Mortar Slab #3 - SR99_110040
665LT by Polyguard Supplier Mortar Slab #1
665LT by Polyguard Supplier Mortar Slab #2
665LT by Polyguard Supplier Mortar Slab #3
665LT by Polyguard CRREL Mortar Slab #1
665LT by Polyguard CRREL Mortar Slab #2
665LT by Polyguard CRREL Mortar Slab #3
M140AR by Protecto Wrap Supplier Mortar Slab #1
M140AR by Protecto Wrap Supplier Mortar Slab #2
M140AR by Protecto Wrap Supplier Mortar Slab #3
M140AR by Protecto Wrap CRREL Mortar Slab #1
M140AR by Protecto Wrap CRREL Mortar Slab #2
M140AR by Protecto Wrap CRREL Mortar Slab #3
Antirock by Sporema Supplier Mortar Slab #1
Antirock by Sporema Supplier Mortar Slab #2
Antirock by Sporema Supplier Mortar Slab #3
Antirock by Sporema CRREL Mortar Slab #1
Antirock by Sporema CRREL Mortar Slab #2
Antirock by Sporema CRREL Mortar Slab #3
Easy Pave ER by Royston CRREL Mortar Slab #1
Easy Pave ER by Royston CRREL Mortar Slab #2
Easy Pave ER by Royston CRREL Mortar Slab #3
Easy Pave ER by Royston Supplier Mortar Slab #1
Easy Pave ER by Royston Supplier Mortar Slab #2
Easy Pave ER by Royston Supplier Mortar Slab #3
APPENDIX C: TENSILE AND ELONGATION TEST DATA
20C (70F) Tension Test
5C (40F) Tension Test
5C (23F) Tension Test
10C (14F) Tension Test
-20C (4F) Tension Test
APPENDIX D: PUNCTURE TEST RESULTS
APPENDIX E. MODIFIED-CUP TEST RESULTS
APPENDIX F. WET-CUP TEST RESULTS
REPORT DOCUMENTATION PAGE - SR99_110074
SR99_11