44
ERDC/CRREL SR-02-1
fill above plug hole. The following lubricants are recommended for use in the
conveyor gearcase.
Summer (above 40F): SAE #140
Winter (below 40F): SAE #90
d. Conveyor chain: Lubricate the conveyor chain frequently. When
using chemicals, lubricate the chain daily to ensure clean, smooth running.
e. For other lubrication and schedules consult the spreader manual.
Table 1. Spreader application rate chart.
This is an estimated rate chart based on an engine speed of 34003600 rpm and a 1-
inch gate setting.
Vehicle Speed
5 mph
10 mph
15 mph
20 mph
25 mph
Type of Material
2496
1248
832
624
499
Sand (lb per mile)
1623
811
541
406
325
Salt (lb per mile)
Calculations based on 100 pounds/foot3 sand and 65 pounds/ft3 salt.
Note: Speed and gate opening dramatically affect amount being spread. As a general
rule of thumb, spread sand at a rate of 625 lb/ln-mi and salt at a rate of 406 lb/ln-mi. To
do this, set gate opening at 1/2 inch and maintain 10 mph.