Snow and Ice Control
59
Line up winch mounting holes on front and clamp hitch to truck rail
and drill all holes in truck rail. (See diagram on page 57.)
Drill first 1/4-inch holes and then drill holes according to the size
in plow hitch.
Fasten plow hitch with bolts and lock nuts and remove clamps.
Mount drive frame to truck.
Place steel cable through left hole on drive frame and feed cable
through approximately 16 inches and fasten with cable clamps.
Slide cable through sheave (one full turn around sheave) and mount
on right-hand side of drive frame.
Previous Page
