Mount plow to drive frame.
Mount end plates to drive frame in such a way that centerline of
plates and drive frame are close to being "in-line" with each other.
Make sure distance between end plates will match mounting holes on
hitch. If adjustment is needed, flat washers will be placed between
end plates and plates on drive frame.
Slide plow and drive frame into hitch and fasten with drive pins.
Secure pins with cotter pins.
Mount hydraulic cylinder to hitch and lift arm and see section on
Remove over a distance "A" on front truck rail, all bolts and nuts.
Slide hitch over truck rail until front touches truck rail and top angle
is resting on rail.