mer Technology Conference, American Chemical Soci-
LITERATURE CITED
ety, Philadelphia, Pennsylvania, Vol. 32, No. 2,
AASHTO (1977) Guide for Selecting, Locating and
June, p. 129130.
Designing Traffic Barriers. American Association of
Challal, O., and B. Benmokrane (1992) Glass-fi-
State Highway and Transportation Officials, Wash-
ber reinforcing rod: Characterization and appli-
ington, D.C.
cation to concrete structures and grouted anchors,
AASHTO (1985) Standard Specifications for Structural
materials performance and prevention of deficien-
Supports for Highway Signs, Luminaries and Traffic
cies and failures. In Proceedings of the Materials
Signals. American Association of State Highway
Engineering Congress, ASCE, Atlanta, Georgia, p.
and Transportation Officials Subcommittee on
606617.
Bridges and Structures, Washington, D.C., p. 40, 68.
Challal, O., and B. Benmokrane (1993) Pullout
AASHTO (1989) Roadside Design Guide. American
and bond of glass-fiber rods embedded in con-
Association of State Highway and Transportation
crete and cement grout. Materials and Structures,
Officials,Task Force for Roadside Safety, Washing-
26: 167175.
ton, D.C., p. 511.
Chamis, C.C. (1974) Mechanics of load transfer
ACI (1958) Test procedure to determine relative
at the interface. Composite Materials, (Edwin P.
bond value of reinforcing bars. American Concrete
Plueddemann, Ed.) Vol. 6, p. 3177. New York:
Institute, Committee 208. ACI Journal, 5: 116.
Academic Press.
Anderson, R.G., E. Munley, and L.C. Bank (1994)
Chen, S., and R.P. Lottman (1991) Buckling loads
Durability of concrete reinforced with pultruded
of columns made of viscoelastic materials. In Pro-
fiber-reinforced plastic grating. Plastics in Build-
ceedings, ASCE Mechanics, Computing in 1960's and
ing Construction, Vol. XVII, No. 9, Lancaster, Penn.:
Beyond (H. Adeli, and R.L. Sierakowski, Ed.), p.
Technomic Publishing Co., p. 612.
691695.
Auchey, F.L., and P.K. Dutta (1996) The use of
Daniali, S. (1992) Development length of fiber
recycled high density polyethylene fibers as sec-
reinforced plastic bars. Advanced Composite Mate-
ondary reinforcement in concrete subjected to se-
rials in Bridges and Structures. First International
vere environment. In Proceedings of the Sixth Inter-
Conference, Sherbrooke, Quebec, Canada, p. 179
national Offshore and Polar Engineering Conference
188.
(1996), Los Angeles, California, 2631 May, p. 287
Dewimille, B., and A.R. Burnsell (1983) Acceler-
291.
ated aging of a glass fiber reinforced epoxy resin
Ballinger, C. (1991) Development of composites
in water. Composites, 14: 35.
for civil engineering. In Proceedings, ASCE Advanced
Dillard, D.A., and H.F. Brinsonson (1983) A
Composites Materials in Civil Engineering Structures,
Numerical Procedure for Predicting Creep and Delayed
Las Vegas, Nevada (S.L. Iyer and R. Sen, Ed.), p.
Failures in Laminated Composites. ASTM STP 813
288301.
(T.K. O'Brien, Ed.), ASTM, Philadelphia, Pennsyl-
vania, p. 2337.
epoxy composites. In Proceedings of the 29th
Dinitz, A.M., and D.B. Chisholm (1978) Devel-
SAMPE Symposium, p. 578591.
opment and testing of a breakaway support cou-
pling for light poles. Roadside Safety Appurtenances,
Bloomquist, D., G. Diamond, M. Ogden, B. Ruth,
and M. Tia (1993) Engineering and environmen-
Transportation Research Record 679, National
tal aspects of recycled materials for highway con-
Academy of Sciences, Washington, D.C., p. 2628.
struction. FHWA Report No. FHWA-RD-93-088.
Dutta, P.K. (1992) Tensile strength of unidirec-
Bocker-Pedersen, O. (1974) Journal of Materials
tional fiber composites at low temperatures. In
Science, 9: 948.
Proceedings of the Sixth Japan-U.S. Conference on
Composite Materials, 2224 June, Orlando, Florida,
Brinson, H.F., W .I. Griffith, and D.H. Morris
(1980) Creep rupture of polymer-matrix compos-
p. 782792.
ites. Fourth SESA International Congress on Experi-
Dutta, P.K. (1994) Low-temperature compressive
mental Mechanics, Boston Massachusetts, p. 329335.
strength of glass-fiber-reinforced polymer com-
Busel, J.P. (1995) FRP Composites in Construction
posites. Journal of Offshore Mechanics and Arctic
Applications. New York, NY: Market Development
Engineering, 116: 167172.
Alliance, SPI Institute.
Dutta, P.K. (1995a) Durability of FRP composites
in fiber reinforced structural plastics in civil engi-
Cao, L., S.G. Byun, D.W. Baugh, C.L. Beatty, and
R. Ramer (1991) Mechanical properties of recycled
neering. In Proceedings of the International Confer-
commingled post materials. In Proceedings of Poly-
ence on Fiber Reinforced Structural Plastics in Civil
58
Previous Page
