Waste Pilot Recycling Program, March 1991. The
Kimball, C.E., M.E. Bronstad, and L.C. Mecz-
kowski (1982) Evaluation of guardrail breakaway
Council for Solid Waste Solutions (A Program
cable terminals. Federal Highway Administration
of the Society of the Plastic Industry Inc.), Wash-
Report No. FHWA/RD-82/057.
ington, D.C.
Miller, W.L., and J.B. Johnson (1989) A review of
Krisnaswamy, P., M.E. Tuttle, A.F. Emery, and J.
Ahmad (1991) Finite element modeling of time
environmental thermoplastic degradation. Uni-
dependent behavior of nonlinear ductile poly-
versity of Florida, Report No. 89-2.
mers. Plastics and Plastic Composites, MD-Vol. 29,
Monaghan, M.R., and L.C. Brinson (1994) Analy-
p. 7799. New York: American Society of Mechani-
sis of variable stress history on polymeric com-
cal Engineers.
posite materials with physical aging. To be pub-
Larralde, J., and R. Siva (1990) Bond stress-slip
lished in Composites Engineering.
relationships of FRP rebars in concrete, service-
Morrison Molded Fiber Glass Company (MMFG)
ability and durability in construction materials.
In Proceedings of the First Materials Engineering Con-
Manual. Section 12, Bristol, Virginia.
gress, Denver, Colorado, August 1990, p. 1134
Mosallam, A.S., and L.C. Bank (1991) Creep and
1141.
recovery of pultruded FRP frame. In Proceedings,
Larsson, F. (1988) The effect of ultraviolet light on
ASCE Advanced Composite Materials in Civil Engi-
mechanical properties of Kevlar 49 composites.
neering Structures, Las Vegas, Nevada (S.L. Iyer and
Environmental Effects on Composite Materials (G.
R. Sen, Ed.), p. 2435.
Springer, Ed.), Vol. 3, p. 132135. Lancaster, Penn.:
Mosallam, A.S., and R.E. Chambers (1995)
Technomic Publishing Co.
Design procedure for predicting creep and recov-
Lord H.W., and P.K. Dutta (1988) On the design
ery of pultruded composites. In Proceedings of the
of polymeric composite structures for cold regions
50th Annual Conference, Composites Institute, The
applications. Journal of Reinforced Plastics and Com-
Society of Plastic Industry, p. 6C/113.
posites, 7: 435450.
Phelps, E.F. (1994) Challenges for the composites
Lorenzo, L., and H.T. Hahn (1986) Fatigue failure
industry in the 1990's, a global concern. In Pro-
mechanisms in unidirectional composites. Compos-
ceedings of the 39th International SAMPE Symposium
ite Materials--Fatigue and Fracture,
ASTM STP 907,
and Exhibition, Vol. 39, p. 23612372 (K. Drake, J.
p. 210.
Baur, T. Serafini, P. Cheng, Ed.), SAMPE, Covina,
Malavar, L.J. (1994) Bond stress-slip characteris-
California.
tics of FRP rebars. Naval Facilities Engineering
Pleimann, L.G. (1991) Strength, modulus of elas-
Service Center, Port Hueneme, California, Tech-
ticity, and bond of deformed FRP rods. In Proceed-
nical Report TR-2013-SHR.
ings, ASCE Advanced Composites Materials in Civil
Mallick, P.K. (1988) Fiber Reinforced Composites.
Engineering Structures, Las Vegas, Nevada (S.L. Iyer
New York: Marcel Dekker, Inc., p. 215248.
and R. Sen, Eds.), p. 99110.
Marshall, A. (1982) Sandwich construction. Hand-
Rivenite (1990) Technical Information TIS-1-90.
book of Composites (G. Lubin, Ed.), p. 557601. New
Philadelphia, Pennsylvania: Riverhead Milling
York: Van Nostrand Reinhold Co.
Inc.
McDevitt, C.F., and P.K. Dutta (1993) New and
Rizkalla, S.H., and A.A. Abdelrehman (1995) FRP
for the 21st century, in fiber reinforced structural
recycled plastic composites for roadside safety
plastics in civil engineering. In Proceedings of the
hardware. Plastics in Building Construction,
International Conference on Fiber Reinforced Struc-
XVIII(2): 612.
tural Plastics in Civil Engineering (S.L. Iyer and V.
Meier, U., and H. Kaiser (1991) Strengthening of
Kalyanraman, Ed.), p. 316. New Delhi: Tata
structures with CFRP laminates. In Proceedings,
McGraw-Hill Publishing Co.
ASCE Advanced Composites Materials in Civil Engi-
Roll, R.D. (1991) Use of GFRP rebar in concrete
neering Structures, Las Vegas, Nevada (S.L. Iyer and
structures. In Proceedings, ASCE Advanced Compos-
R. Sen, Ed.), p. 224232.
ites Materials in Civil Engineering Structures, Las
Michie, J.D. (1981) Recommended Procedures for the
Vegas, Nevada (S.L. Iyer and R. Sen, Ed.), p. 9398.
Safety Evaluation of Highway Appurtenances. Trans-
portation Research Board, Washington, D.C.,
Ross, H.E., H.S. Perera, D.L. Sicking, and R.P.
Bligh (1989) Roadside Safety Designs for Small
Report No. 230, March 1981.
Program Report 318.
Middleton, L.B., J.Y. Huntley, and J.J. Burgiel
Seible, F. (1996) Advanced composite materials
(1991) U.S. Navy Shipboard-Generated Plastic
60