of R-113 on horizontal finned tubes. In Fundamentals of Phase Change: Boiling and Condensa-
tion (H.R. Jacobs, Ed.), vol. 2, p. 583592. American Society of Mechanical Engineers.
Masuda, H. and J.W . Rose (1987) Static configuration of liquid films on horizontal tubes
with low radial fins: Implications for condensation heat transfer. Proceedings of the Royal
Society of London, A410: 125139.
McQuiston, F. (1975) Fin efficiency with combined heat and mass transfer. ASHRAE
Transactions, 81(1): 350355.
Memory, S.B. and J.W . Rose (1986) Film condensation of ethylene glycol on a horizontal
tube at high vapor velocity. In Proceedings of the 8th International Heat Transfer Conference
(C.L. Tien et al., Eds.), vol. 4, p. 16071612. Washington, D.C.: Hemisphere Publishing Corp.
Michael, A.G., P.J. Marto, A.S. Wanniarachchi and J.W . Rose (1989) Effect of vapor
velocity during condensation on horizontal smooth and finned tubes. In Heat Transfer with
Change of Phase, ASME Symposium, HTD-Vol. 144, p. 110.
Motwani, D.G., U.N. Gaitonde and S.P. Sukhatme (1985) Heat transfer from rectangular
plates inclined at different angles of attack and yaw to an air flow. ASME Journal of Heat
Transfer, 107: 307312.
Na, T.Y. (1979) Computational Methods in Engineering Boundary Value Problems. New York:
Academic Press.
Nader, W .K. (1978) Extended surface heat transfer with condensation. Paper CS-5, Pro-
ceedings of the 6th International Heat Transfer Conference, p. 407412.
Owen, R.G., R.G. Sardesai, R.A. Smith and W .C. Lee (1983) Gravity controlled conden-
sation on low integral-fin tubes. In Proceedings of the Symposium on Condensers: Theory and
Practice, I. Chemical Engineering Symposium Series, No. 75, p. 415428.
Patankar, S.V. and E.M. Sparrow (1979) Condensation on an extended surface. ASME
Journal of Heat Transfer, 101: 434440.
Pearson, J.F. and J.G. Withers (1969) New finned tube configuration improves refrigerant
condensing. ASHRAE Transactions, 75: 7782.
Reisbig, R.L. (1974) Condensing heat transfer augmentation inside splined tubes. AIAA/
ASME Thermophysics Conference, Boston, Paper 47-HT-7.
Rose, J.W . (1994) An approximate equation for the vapor-side heat transfer coefficient for
condensation on low-finned tubes. International Journal of Heat and Mass Transfer, 37: 865875.
Royal, J.H. and A.E. Bergles (1978) Augmentation of horizontal in-tube condensation by
means of twisted tape inserts and internally finned tubes. ASME Journal of Heat Transfer,
100: 1724.
Rudy, T.M. and R.L. Webb (1981) Condensate retention on horizontal integral-fin tubing.
Advances in Heat Transfer, ASME-HTD, 18: 3541.
Rudy, T.M. and R.L. Webb (1983a) An analytical model to predict condensate retention on
horizontal integral-fin tubes. Proceedings ASME-JSME Thermal Engineering Joint Confer-
ence, vol. 1, p. 373378. New York: American Society of Mechanical Engineers.
integral-fin tubes. Heat Transfer--Seattle 1983, AIChE Symposium Series (N.M. Farukhi,
Ed.), vol. 79, p. 1118.
Rudy, T.M. and R.L. Webb (1985) An analytical model to predict condensate retention on
horizontal integral-fin tubes. ASME Journal of Heat Transfer, 107: 361368.
inside horizontal finned tubes. ASHRAE Transactions, 89(1): 114124.
Schlager, L.M., M.B. Pate and A.E. Bergles (1989) Performance of micro-fin tubes with
refrigerant-22 and oil mixtures. ASHRAE Journal, November, p. 1728.
Schlager, L.M., M.B. Pate and A.E. Bergles (1990a) Performance predictions of refriger-
48
Previous Page
