tube bundles. In Proceedings of the Symposium on Condensers: Theory and Practice, I. Chemi-
cal Engineering Symposium Series no. 75, p. 429446.
Jaber, M.H. and R.L. Webb (1993) An experimental investigation of enhanced tubes for
steam condensers. Experimental Heat Transfer, 6: 3554.
Kaarvinen, R., H. Karema and P. Siskanen (1990) Treatment of moisture condensation on
fins. Wrme-und Stoffbertragung, 25: 2731.
Karkhu, V.A. and V.P. Borovkov (1971) Film condensation of vapor at finely-finned
horizontal tubes. Heat Transfer--Soviet Research, 3: 183191.
Katz, D.L. and J.M. Geist (1948) Condensation of six finned tubes in a vertical row.
Transactions ASME, 70: 907914.
Katz, D.L., R.C. Hope and S.C. Datsko (1946) Liquid retention on integral-finned tubes.
Department of Engineering Research, University of Michigan, Ann Arbor, Michigan,
Project No. M592.
Kaushik, N. and N.Z. Azer (1988) A
general heat transfer correlation for condensation
inside internally finned tubes. ASHRAE Transactions, 94(2): 261279.
Kaushik, N. and N.Z. Azer (1989) An analytical heat transfer prediction model for con-
densation inside longitudinally finned tubes. ASHRAE Transactions, 95(2): 516523.
Kaushik, N. and N.Z. Azer (1990) A
general pressure drop correlation for condensation
inside internally finned tubes. ASHRAE Transactions, 96(1): 242255.
Kazeminejad, H. (1987) Dehumidification of turbulent air flow over a thick fin. Ph.D.
Thesis (unpublished), University of Leeds, U.K.
Kazeminejad, H. (1993) Effect of
vapor drag on
laminar film condensation on a
vertical
rectangular fin. Proceedings of the Institute of Mechanical Engineers, 207: 6369.
Kazeminejad, H., M.A. Yaghoubi and F. Bahri (1993) Conjugate forced convection-con-
duction analysis of the performance of a cooling and dehumidifying vertical rectangular
fin. International Journal of Heat and Mass Transfer, 36: 36253631.
Kedzierski, M.A. and R.L. Webb (1990) Practical fin shapes for surface-tension-drained
condensation. ASME Journal of Heat Transfer, 112: 479485.
Kern, D.Q. (1958) Mathematical development of
loading in
horizontal condensers.
AIChE
Journal, 4: 157160.
Kern, D.Q. and A.D. Kraus (1972) Extended Surface Heat Transfer. New York: McGraw-Hill.
Kilic, A. and K. Onat (1981) The optimum shape for convecting rectangular fins when
condensation occurs. Wrme-und Stoffbertragung, 15: 125133.
with and without non-condensing gases. International Journal of Heat and Mass Transfer, 27:
519528.
Lienhard, J.H. and V.K. Dhir (1974) Laminar film condensation on nonisothermal and
arbitrary-heat-flux surfaces and on fins. ASME Journal of Heat Transfer, 96: 197203.
Luu, M. and A.E. Bergles (1979) Experimental study of the augmentation of the in-tube
condensation of R-113. ASHRAE Transactions, 85(2): 132146.
Luu, M. and A.E. Bergles (1980) Enhancement of horizontal in-tube condensation of R-
113. ASHRAE Transactions, 85(2): 293312.
Marto, P.J. (1986) Recent progress in enhancing film condensation on horizontal tubes. In
Proceedings of the 8th International Heat Transfer Conference, vol. 1, p. 161170.
Marto, P.J. (1988) An evaluation of film condensation on horizontal integral-fin tubes.
ASME Journal of Heat Transfer, 110: 12871305.
Marto, P.J. (1992) Film condensation heat transfer measurements on horizontal tubes:
Problems and progress. Experimental Thermal and Fluid Science, 5: 556569.
Marto, P.J., D. Zebrowski, A.S. Wanniarachchi and J.W. Rose (1988) Film condensation
47