Denmark (B. Bhm, Ed.).
NRC (National Research Council) (1985) District Heating and Cooling in the United
States, Prospects and Issues. Committee on
District Heating and Cooling, Energy
Engineering Board and Building Research Board, Commission on Engineering and
Technical Systems. Washington, D.C.: National Academy Press.
Papalambros, P.Y. and D.J. Wilde (1988) Principles of Optimal Design, Modeling and
Computation. Cambridge: Cambridge University Press.
Phetteplace, G.E. (1981) Transient analysis of heat transmission systems. USA Cold
Regions Research and Engineering Laboratory, CRREL Report 81-24.
Phetteplace, G.E., W. Willey and M. Novick (1981) Heat losses from the Fort
Wainwright heat distribution system. USA Cold Regions Research and Engineering
Laboratory, Special Report 81-14
Phetteplace, G.E. and V.P. Meyer (1990) Piping for thermal distribution systems.
USA Cold Regions Research and Engineering Laboratory, Internal Report 1059
(unpublished).
Rao, S.S. (1984) Optimization: Theory and Applications, Second Edition. New Delhi:
Wiley Eastern Limited.
Rasmussen, C.H. and J.E. Lund (undated) Computer aided design of district
heating systems. From District Heating Research and Technological Development
in Denmark, Danish Ministry of Energy.
Reisman, A.W. (1985) District Heating Handbook. Vol. 2, A Handbook of District
Heating and Cooling Models. Washington, D.C.: International District Heating and
Cooling Association.
Reklaitis, G.V., A. Ravindran and K.M. Ragsdell (1983) Engineering Optimization:
Methods and Applications. New York: Wiley-Interscience, John Wiley & Sons, Inc.
Reynolds, W.C. and H.C. Perkins (1977) Engineering Thermodynamics, Second
Edition. New York: McGraw-Hill Book Company.
R. S. Means Co., Inc. (1987) Mechanical Cost Data, 11th Annual Edition. Kingston,
Massachusetts.
Segan, E.G. and C. Chen (1984) Investigation of tri-service heat distribution
systems. U.S. Army Construction Engineering Research Laboratory, Technical
Report M-347.
Soumerai, H. (1987) Practical Thermodynamic Tools for Heat Exchanger Design Engi-
neers. New York: John Wiley and Sons.
Stoner, M. (1974) Modeling the steady state pressure-flow response of steam and
water systems. In Proceedings of the Annual Conference of the International District
Heating Association, p. 5369.
Szepe, S. and J. Calm (1979) Thermal fluid selection for long-distance heat transmis-
sion. In Proceedings of the 14th Intersociety Energy Conversion Engineering Conference,
510 August, Boston, Massachusetts, p. 19851990.
Vanderplaats, G.N. (1984) Numerical Optimization Techniques for Engineering Design:
With Applications. New York: McGraw-Hill Book Company.
Werner, S.E. (1984) The Heat Load in District Heating Systems. Goteborg, Sweden:
Chalmers University of Technology.
Wilde, D.J. and C.S. Beightler (1967) Foundations of Optimization. Englewood Cliffs,
New Jersey: Prentice-Hall, Inc.
Wood, D. J. (1966) An
explicit friction factor relationship. Civil Engineering, 36
(12).
Zinger, N.M., K.S. Andreeva, E.M. Fedorov and T.B. Oshchepkova (1976) Hydrau-
lic design of a branched heating network, employing an electronic digital computer.
Teploenergetika, 23(11): 2024.
78